0.96" OLED Display (I2C, SSD1306)
128×64 monochrome OLED on I2C. Crisp, low-power, and the perfect status display.
Price last verified: 6 Nov 2026 · Check seller specifications before ordering
Buy
Maker Marketplace MY is an independent electronics and maker resource. We link out to third-party marketplaces such as Shopee Malaysia and Lazada Malaysia. Purchases happen on those external sites, not here. We may earn an affiliate commission when you buy through our links, at no extra cost to you. Prices are shown only when recorded; check the seller’s current price, specifications and delivery terms before ordering.
Opens externally in a new tab. We do not handle checkout or fulfilment.
Full description
This is the 0.96 inch 128×64 monochrome OLED module based on the SSD1306 controller. It talks over I2C (default address 0x3C), runs from 3.3V or 5V, draws under 20 mA and is visible in bright sunlight. With Adafruit_SSD1306 or the lighter U8g2 library you can show text, sensor values and small graphics without an external GPU.
Main use case
Status readout, sensor display, menu UI.
Intended audience
Beginners adding a screen to an Arduino or ESP32 project.
Why we recommend it
Best price-to-readability for a status display in the Malaysian market.
Specifications
| Resolution | 128 × 64 |
| Diagonal | 0.96" |
| Controller | SSD1306 |
| Interface | I2C |
| Default address | 0x3C |
| Voltage | 3.3 – 5 V |
Pros & Cons
Pros
- Crisp black-on-white pixels in any light
- I2C — only two data wires
- 3.3V and 5V tolerant
- Tiny and low-power
Cons
Common beginner mistakes to avoid
- Hard-coding 0x3C when the module is 0x3D (use an I2C scanner first)
- Mixing SDA and SCL
- Forgetting pull-ups on a bare sensor with weak MCU pull-ups
- Calling display() without a buffer clear → ghost text
Who should avoid it
Colour or fast-refresh UIs — step up to an ST7789 or e-paper.